Trampoline Safety Standards Explained: What AS 4989 Means for Your Backyard

Buying a backyard trampoline means sorting through weight limits, enclosure types, and safety claims from dozens of brands. What most parents do not realise is that no law requires trampolines to meet a specific safety standard before they go on sale. The guidance that does exist comes from the ACCC's Product Safety Australia and a voluntary Australian Standard, AS 4989. This guide breaks down the trampoline safety standards that matter and what Australian guidance recommends for backyard use.

What Is AS 4989 and Why It Matters for Trampoline Safety

The Australian Competition and Consumer Commission (ACCC), through Product Safety Australia, is responsible for protecting consumers from unsafe household products. For trampolines, it publishes safety advice and tracks injury data, but there is no mandatory trampoline-specific regulation. Instead, manufacturers can build to AS 4989, the voluntary Australian Standard for domestic trampolines. Product Safety Australia reports that trampolines injure thousands of Australian children every year. Common causes include falling off the trampoline, landing on the frame or springs, and colliding with another jumper. The voluntary Australian Standard AS 4989:2015, Trampolines for domestic use—Safety aspects, guides trampoline design in Australia:

• It covers the components, assembly, use, and labelling of consumer trampolines, including structural testing and shock attenuation.
• It also sets performance and safety requirements for the enclosure, including net strength, attachment design, and gap sizes. Major retailers often require compliance with AS 4989 before listing a trampoline. But because the standard is voluntary, not every product on the market has been tested.

Key Safety Recommendations for Backyard Trampolines

The published safety advice is straightforward:

• Allow only one person on the trampoline at a time.
• Do not allow children under six to use a full-size trampoline.
• Always supervise children while they bounce.
• Use shock-absorbing pads that completely cover the springs, hooks, and frame.
• Do not attempt somersaults or flips, as landing on the head or neck can cause paralysis.
• Do not attach a ladder, since it lets small children climb on unsupervised.
• Place the trampoline away from structures, trees, and other play areas.
• Use an enclosure to help prevent falls off the jumping surface. These are recommendations, not laws. The ACCC can issue a recall when a specific product presents a documented hazard, but it cannot fine a manufacturer for skipping an enclosure or padding.

How Springless Design Addresses These Core Concerns

Several of these recommendations target problems caused by traditional spring-based designs. Metal coil springs create pinch points. Exposed frames cause impact injuries. Gaps between the mat and frame let limbs slip through.

No Springs, No Exposed Frame

Springfree® trampolines use flexible composite rods instead of metal springs, removing pinch-point hazards entirely. The steel frame sits below the jumping surface, so landing on it during normal use is not possible. The SoftEdge™ mat border replaces hard frame padding with a flexible surface that is part of the mat itself.

Built-In Enclosure and Warranty

Every model ships with a FlexiNet® enclosure attached to flexible rods rather than rigid metal poles. The net flexes and redirects jumpers back toward the centre instead of bouncing them into a hard post. All Springfree trampolines are built to AS 4989 and include a 10-year warranty on every component.

Enclosure and Padding Standards Explained

AS 4989 addresses the different parts of trampoline safety together. Here is what the standard covers and where Springfree's design fits.

Enclosure Testing Under AS 4989

AS 4989 sets the benchmark for trampoline enclosures. It covers net material strength, attachment to the frame, gap sizes, and impact load performance. A compliant enclosure should prevent a jumper from passing through or falling over the net during use. Product Safety Australia recommends enclosures but does not require them. Many budget trampolines still ship without one, and some include nets attached to rigid steel poles at the mat edge, which can become impact hazards themselves.

Padding Requirements Under AS 4989

Padding requirements under AS 4989 call for shock-absorbing pads over all springs, hooks, and exposed frame sections. On a traditional trampoline, these pads degrade with UV exposure and weather and may need replacement every one to three years. Springfree's design sidesteps the padding question entirely. With no springs or exposed frame above the mat, there is nothing to pad. The SoftEdge™ mat extends past the bounce area with no hard edge at the transition to the enclosure.

What the Standards Don't Cover (and What to Check Yourself)

Trampoline safety standards address structural and design risks but leave out several factors that affect real-world safety:

• Weight limits. AS 4989 does not set a universal weight limit. Each manufacturer determines its own based on internal testing. Check the single-jumper guidance for your specific model, not just the structural load rating.
• Durability over time. Standards test new products. They do not measure how a trampoline performs after years of outdoor exposure. A longer warranty signals that the manufacturer trusts its materials to last.
• Ground surface. Safety advice recommends keeping trampolines away from hard surfaces but does not specify ground preparation. Grass or soft-fall matting underneath provides a softer landing if a fall occurs.
• Installation quality. A trampoline that meets every standard on paper can still be unsafe if assembled incorrectly. Follow the manufacturer's instructions and check connections at the start of each season. Browse the full Springfree safety page to see how each design feature maps to common trampoline risks, or visit the FAQ page for model-specific questions.

Frequently Asked Questions

Are trampolines required to meet Australian safety standards?

No. Product Safety Australia publishes safety advice, but there is no mandatory trampoline safety standard in Australia. AS 4989 is a voluntary Australian Standard. Major retailers often require compliance before listing a product, but it is not a legal requirement.

What does Australian guidance recommend for trampoline enclosure nets?

Safety advice recommends using an enclosure to help prevent falls off the trampoline but does not specify net materials or designs. AS 4989 covers enclosure performance testing, including net strength, attachment methods, and gap sizes. Look for trampolines built to this standard.

Have any trampolines been recalled in Australia?

Yes. The ACCC has recalled trampolines with defective enclosure attachments, broken frames, and similar hazards. Recalls are product-specific. You can search current recalls at productsafety.gov.au.

What is AS 4989?

AS 4989:2015 is the voluntary Australian Standard for domestic trampolines. It covers components, assembly, labelling, enclosures, and testing requirements including structural and shock-attenuation tests. It applies to home-use trampolines and excludes institutional models.

Do Springfree trampolines meet safety standards?

Yes. All Springfree models are built to AS 4989. The springless design, hidden frame, and flexible enclosure go beyond what the standard requires by eliminating the components that cause the most common trampoline injuries.

What age is safe for a backyard trampoline?

Australian safety guidance recommends children under six not use a full-size trampoline. Springfree offers kid-friendly models with lower entry heights and full enclosures. Adult supervision is recommended for all ages.